Tickling VMProtect with LLVM: Part 3
2021-9-9 07:0:0 Author: secret.club(查看原文) 阅读量:4 收藏

This post will introduce 7 custom passes that, once added to the optimization pipeline, will make the overall LLVM-IR output more readable. Some words will be spent on the unsupported instructions lifting and recompilation topics. Finally, the output of 6 devirtualized functions will be shown.

This section will give an overview of some custom passes meant to:

  • Solve VMProtect specific optimization problems;
  • Solve some limitations of existing LLVM passes, but that won’t meet the same quality standard of an official LLVM pass.

SegmentsAA

This pass falls under the category of the VMProtect specific optimization problems and is probably the most delicate of the section, as it may be feeding LLVM with unsafe assumptions. The aliasing information described in the Liveness and aliasing information section will finally come in handy. In fact, the goal of the pass is to identify the type of two pointers and determine if they can be deemed as not aliasing with one another.

With the structures defined in the previous sections, LLVM is already able to infer that two pointers derived from the following sources don’t alias with one another:

  • general purpose registers
  • VmRegisters
  • VmPassingSlots
  • GS zero-sized array
  • FS zero-sized array
  • RAM zero-sized array (with constant index)
  • RAM zero-sized array (with symbolic index)

Additionally LLVM can also discern between pointers with RAM base using a simple symbolic index. For example an access to [rsp - 0x10] (local stack slot) will be considered as NoAlias when compared with an access to [rsp + 0x10] (incoming stack argument).

But LLVM’s alias analysis passes fall short when handling pointers using as base the RAM array and employing a more convoluted symbolic index, and the reason for the shortcoming is entirely related to the lack of type and context information that got lost during the compilation to binary.

The pass is inspired by existing implementations (1, 2, 3) that are basing their checks on the identification of pointers belonging to different segments and address spaces.

Slicing the symbolic index used in a RAM array access we can discern with high confidence between the following additional NoAlias memory accesses:

  • indirect access: if the access is a stack argument ([rsp] or [rsp + positive_constant_offset + symbolic_offset]), a dereferenced general purpose register ([rax]) or a nested dereference (val1 = [rax], val2 = [val1]); identified as TyIND in the code;
  • local stack slot: if the access is of the form [rsp - positive_constant_offset + symbolic_offset]; identified as TySS in the code;
  • local stack array: if the access if of the form [rsp - positive_constant_offset + phi_index]; identified as TyARR in the code.

If the pointer type cannot be reliably detected, an unknown type (identified as TyUNK in the code) is being used, and the comparison between the pointers is automatically skipped. If the pass cannot return a NoAlias result, the query is passed back to the default alias analysis pipeline.

One could argue that the pass is not really needed, as it is unlikely that the propagation of the sensitive information we need to successfully explore the virtualized CFG is hindered by aliasing issues. In fact, the computation of a conditional branch at the end of a VmBlock is guaranteed not to be hindered by a symbolic memory store happening before the jump VmHandler accesses the branch destination. But there are some cases where VMProtect pushes the address of the next VmStub in one of the first VmBlocks, doing memory stores in between and accessing the pushed value only in one or more VmExits. That could be a case where discerning between a local stack slot and an indirect access enables the propagation of the pushed address.

Irregardless of the aforementioned issue, that can be solved with some ad-hoc store-to-load detection logic, playing around with the alias analysis information that can be fed to LLVM could make the devirtualized code more readable. We have to keep in mind that there may be edge cases where the original code is breaking our assumptions, so having at least a vague idea of the involved pointers accessed at runtime could give us more confidence or force us to err on the safe side, relying solely on the built-in LLVM alias analysis passes.

The assembly snippet shown below has been devirtualized with and without adding the SegmentsAA pass to the pipeline. If we are sure that at runtime, before the push rax instruction, rcx doesn’t contain the value rsp - 8 (extremely unexpected on benign code), we can safely enable the SegmentsAA pass and obtain a cleaner output.

start:
  push rax
  mov qword ptr [rsp], 1
  mov qword ptr [rcx], 2
  pop rax

The assembly code writing to two possibly aliasing memory slots

define dso_local i64 @F_0x14000101f(i64* noalias nonnull align 8 dereferenceable(8) %rax, i64* noalias nonnull align 8 dereferenceable(8) %rbx, i64* noalias nonnull align 8 dereferenceable(8) %rcx, i64* noalias nonnull align 8 dereferenceable(8) %rdx, i64* noalias nonnull align 8 dereferenceable(8) %rsi, i64* noalias nonnull align 8 dereferenceable(8) %rdi, i64* noalias nonnull align 8 dereferenceable(8) %rbp, i64* noalias nonnull align 8 dereferenceable(8) %rsp, i64* noalias nonnull align 8 dereferenceable(8) %r8, i64* noalias nonnull align 8 dereferenceable(8) %r9, i64* noalias nonnull align 8 dereferenceable(8) %r10, i64* noalias nonnull align 8 dereferenceable(8) %r11, i64* noalias nonnull align 8 dereferenceable(8) %r12, i64* noalias nonnull align 8 dereferenceable(8) %r13, i64* noalias nonnull align 8 dereferenceable(8) %r14, i64* noalias nonnull align 8 dereferenceable(8) %r15, i64* noalias nonnull align 8 dereferenceable(8) %flags, i64 %KEY_STUB, i64 %RET_ADDR, i64 %REL_ADDR) #2 {
  %1 = load i64, i64* %rcx, align 8, !alias.scope !22, !noalias !27
  %2 = inttoptr i64 %1 to i64*
  store i64 2, i64* %2, align 1, !noalias !65
  store i64 1, i64* %rax, align 8, !tbaa !4, !alias.scope !66, !noalias !67
  ret i64 5368713278
}

The devirtualized code with the SegmentsAA pass added to the pipeline, with the assumption that rcx differs from rsp - 8

define dso_local i64 @F_0x14000101f(i64* noalias nonnull align 8 dereferenceable(8) %rax, i64* noalias nonnull align 8 dereferenceable(8) %rbx, i64* noalias nonnull align 8 dereferenceable(8) %rcx, i64* noalias nonnull align 8 dereferenceable(8) %rdx, i64* noalias nonnull align 8 dereferenceable(8) %rsi, i64* noalias nonnull align 8 dereferenceable(8) %rdi, i64* noalias nonnull align 8 dereferenceable(8) %rbp, i64* noalias nonnull align 8 dereferenceable(8) %rsp, i64* noalias nonnull align 8 dereferenceable(8) %r8, i64* noalias nonnull align 8 dereferenceable(8) %r9, i64* noalias nonnull align 8 dereferenceable(8) %r10, i64* noalias nonnull align 8 dereferenceable(8) %r11, i64* noalias nonnull align 8 dereferenceable(8) %r12, i64* noalias nonnull align 8 dereferenceable(8) %r13, i64* noalias nonnull align 8 dereferenceable(8) %r14, i64* noalias nonnull align 8 dereferenceable(8) %r15, i64* noalias nonnull align 8 dereferenceable(8) %flags, i64 %KEY_STUB, i64 %RET_ADDR, i64 %REL_ADDR) #2 {
  %1 = load i64, i64* %rsp, align 8, !tbaa !4, !alias.scope !22, !noalias !27
  %2 = add i64 %1, -8
  %3 = load i64, i64* %rcx, align 8, !alias.scope !65, !noalias !66
  %4 = inttoptr i64 %2 to i64*
  store i64 1, i64* %4, align 1, !noalias !67
  %5 = inttoptr i64 %3 to i64*
  store i64 2, i64* %5, align 1, !noalias !67
  %6 = load i64, i64* %4, align 1, !noalias !67
  store i64 %6, i64* %rax, align 8, !tbaa !4, !alias.scope !68, !noalias !69
  ret i64 5368713278
}

The devirtualized code without the SegmentsAA pass added to the pipeline and therefore no assumptions fed to LLVM

Alias analysis is a complex topic, and experience thought me that most of the propagation issues happening while using LLVM to deobfuscate some code are related to the LLVM’s alias analysis passes being hinder by some pointer computation. Therefore, having the capability to feed LLVM with context-aware information could be the only way to handle certain types of obfuscation. Beware that other tools you are used to are most likely doing similar “safe” assumptions under the hood (e.g. concolic execution tools using the concrete pointer to answer the aliasing queries).

The takeaway from this section is that, if needed, you can define your own alias analysis callback pass to be integrated in the optimization pipeline in such a way that pre-existing passes can make use of the refined aliasing query results. This is similar to updating IDA’s stack variables with proper type definitions to improve the propagation results.

KnownIndexSelect

This pass falls under the category of the VMProtect specific optimization problems. In fact, whoever looked into VMProtect 3.0.9 knows that the following trick, reimplemented as high level C code for simplicity, is being internally used to select between two branches of a conditional jump.

uint64_t ConditionalBranchLogic(uint64_t RFLAGS) {
  // Extracting the ZF flag bit
  uint64_t ConditionBit = (RFLAGS & 0x40) >> 6;
  // Writing the jump destinations
  uint64_t Stack[2] = { 0 };
  Stack[0] = 5369966919;
  Stack[1] = 5369966790;
  // Selecting the correct jump destination
  return Stack[ConditionBit];
}

What is really happening at the low level is that the branch destinations are written to adjacent stack slots and then a conditional load, controlled by the previously computed flags, is going to select between one slot or the other to fetch the right jump destination.

LLVM doesn’t automatically see through the conditional load, but it is providing us with all the needed information to write such an optimization ourselves. In fact, the ValueTracking analysis exposes the computeKnownBits function that we can use to determine if the index used in a getelementptr instruction is bound to have just two values.

At this point we can generate two separated load instructions accessing the stack slots with the inferred indices and feed them to a select instruction controlled by the index itself. At the next store-to-load propagation, LLVM will happily identify the matching store and load instructions, propagating the constants representing the conditional branch destinations and generating a nice select instruction with second and third constant operands.

; Matched pattern
%i0 = add i64 %base, %index
%i1 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %i0
%i2 = bitcast i8* %i1 to i64*
%i3 = load i64, i64* %i2, align 1

; Exploded form
%51 = add i64 %base, 0
%52 = add i64 %base, 8
%53 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
%54 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %52
%55 = bitcast i8* %53 to i64*
%56 = bitcast i8* %54 to i64*
%57 = load i64, i64* %55, align 8
%58 = load i64, i64* %56, align 8
%59 = icmp eq i64 %index, 0
%60 = select i1 %59, i64 %57, i64 %58

; Simplified select instruction
%59 = icmp eq i64 %index, 0
%60 = select i1 %59, i64 5369966919, i64 5369966790

The snippet above shows the matched pattern, its exploded form suitable for the LLVM propagation and its final optimized shape. In this case the ValueTracking analysis provided the values 0 and 8 as the only feasible ones for the %index value.

A brief discussion about this pass can be found in this chain of messages in the LLVM mailing list.

SynthesizeFlags

This pass falls in between the categories of the VMProtect specific optimization problems and LLVM optimization limitations. In fact, this pass is based on the enumerative synthesis logic implemented by Souper, with some minor tweaks to make it more performant for our use-case.

This pass exists because I’m lazy and the fewer ad-hoc patterns I write, the happier I am. The patterns we are talking about are the ones generated by the flag manipulations that VMProtect does when computing the condition for a conditional branch. LLVM already does a good job with simplifying part of the patterns, but to obtain mint-like results we absolutely need to help it a bit.

There’s not much to say about this pass, it is basically invoking Souper’s enumerative synthesis with a selected set of components (Inst::CtPop, Inst::Eq, Inst::Ne, Inst::Ult, Inst::Slt, Inst::Ule, Inst::Sle, Inst::SAddO, Inst::UAddO, Inst::SSubO, Inst::USubO, Inst::SMulO, Inst::UMulO), requiring the synthesis of a single instruction, enabling the data-flow pruning option and bounding the LHS candidates to a maximum of 50. Additionally the pass is executing the synthesis only on the i1 conditions used by the select and br instructions.

This Godbolt page shows the devirtualized LLVM-IR output obtained appending the SynthesizeFlags pass to the pipeline and the resulting assembly with the properly recompiled conditional jumps. The original assembly code can be seen below. It’s a dummy sequence of instructions where the key piece is the comparison between the rax and rbx registers that drives the conditional branch jcc.

start:
  cmp rax, rbx
  jcc label
  and rcx, rdx
  mov qword ptr ds:[rcx], 1
  jmp exit
label:
  xor rcx, rdx
  add qword ptr ds:[rcx], 2
exit:

MemoryCoalescing

This pass falls under the category of the generic LLVM optimization passes that couldn’t possibly be included in the mainline framework because they wouldn’t match the quality criteria of a stable pass. Although the transformations done by this pass are applicable to generic LLVM-IR code, even if the handled cases are most likely to be found in obfuscated code.

Passes like DSE already attempt to handle the case where a store instruction is partially or completely overlapping with other store instructions. Although the more convoluted case of multiple stores contributing to the value of a single memory slot are somehow only partially handled.

This pass is focusing on the handling of the case illustrated in the following snippet, where multiple smaller stores contribute to the creation of a bigger value subsequently accessed by a single load instruction.

define dso_local i64 @WhatDidYouDoToMySonYouEvilMonster(i64* noalias nonnull align 8 dereferenceable(8) %rax, i64* noalias nonnull align 8 dereferenceable(8) %rbx, i64* noalias nonnull align 8 dereferenceable(8) %rcx, i64* noalias nonnull align 8 dereferenceable(8) %rdx, i64* noalias nonnull align 8 dereferenceable(8) %rsi, i64* noalias nonnull align 8 dereferenceable(8) %rdi, i64* noalias nonnull align 8 dereferenceable(8) %rbp, i64* noalias nonnull align 8 dereferenceable(8) %rsp, i64* noalias nonnull align 8 dereferenceable(8) %r8, i64* noalias nonnull align 8 dereferenceable(8) %r9, i64* noalias nonnull align 8 dereferenceable(8) %r10, i64* noalias nonnull align 8 dereferenceable(8) %r11, i64* noalias nonnull align 8 dereferenceable(8) %r12, i64* noalias nonnull align 8 dereferenceable(8) %r13, i64* noalias nonnull align 8 dereferenceable(8) %r14, i64* noalias nonnull align 8 dereferenceable(8) %r15, i64* noalias nonnull align 8 dereferenceable(8) %flags, i64 %KEY_STUB, i64 %RET_ADDR, i64 %REL_ADDR) {
  %1 = load i64, i64* %rsp, align 8
  %2 = add i64 %1, -8
  %3 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %2
  %4 = add i64 %1, -16
  %5 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %4
  %6 = load i64, i64* %rax, align 8
  %7 = add i64 %1, -10
  %8 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %7
  %9 = bitcast i8* %8 to i64*
  store i64 %6, i64* %9, align 1
  %10 = bitcast i8* %8 to i32*
  %11 = trunc i64 %6 to i32
  %12 = add i64 %1, -6
  %13 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %12
  %14 = bitcast i8* %13 to i32*
  store i32 %11, i32* %14, align 1
  %15 = bitcast i8* %13 to i16*
  %16 = trunc i64 %6 to i16
  %17 = add i64 %1, -4
  %18 = add i64 %1, -12
  %19 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %18
  %20 = bitcast i8* %19 to i64*
  %21 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %17
  %22 = bitcast i8* %21 to i16*
  %23 = load i16, i16* %22, align 1
  store i16 %23, i16* %15, align 1
  %24 = load i32, i32* %14, align 1
  %25 = shl i32 %24, 8
  %26 = bitcast i8* %21 to i32*
  store i32 %25, i32* %26, align 1
  %27 = bitcast i8* %3 to i16*
  store i16 %16, i16* %27, align 1
  %28 = bitcast i8* %8 to i16*
  store i16 %16, i16* %28, align 1
  %29 = load i32, i32* %10, align 1
  %30 = shl i32 %29, 8
  %31 = bitcast i8* %3 to i32*
  store i32 %30, i32* %31, align 1
  %32 = add i64 %1, -14
  %33 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %32
  %34 = add i64 %1, -2
  %35 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %34
  %36 = bitcast i8* %35 to i16*
  %37 = load i16, i16* %36, align 1
  store i16 %37, i16* %27, align 1
  %38 = add i64 %1, -18
  %39 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %38
  %40 = bitcast i8* %39 to i64*
  store i64 %6, i64* %40, align 1
  %41 = bitcast i8* %39 to i32*
  %42 = bitcast i8* %33 to i16*
  %43 = load i16, i16* %42, align 1
  %44 = bitcast i8* %19 to i16*
  %45 = load i16, i16* %44, align 1
  store i16 %45, i16* %42, align 1
  %46 = bitcast i8* %33 to i32*
  %47 = load i32, i32* %46, align 1
  %48 = shl i32 %47, 8
  %49 = bitcast i8* %19 to i32*
  store i32 %48, i32* %49, align 1
  %50 = bitcast i8* %5 to i16*
  store i16 %43, i16* %50, align 1
  %51 = bitcast i8* %39 to i16*
  store i16 %43, i16* %51, align 1
  %52 = load i32, i32* %41, align 1
  %53 = shl i32 %52, 8
  %54 = bitcast i8* %5 to i32*
  store i32 %53, i32* %54, align 1
  %55 = load i16, i16* %28, align 1
  store i16 %55, i16* %50, align 1
  %56 = load i32, i32* %54, align 1
  store i32 %56, i32* %49, align 1
  %57 = load i64, i64* %20, align 1
  store i64 %57, i64* %rax, align 8
  ret i64 5368713262
}

Now, you can arm yourself with patience and manually match all the store and load operations, or you can trust me when I tell you that all of them are concurring to the creation of a single i64 value that will be finally saved in the rax register.

The pass is working at the intra-block level and it’s relying on the analysis results provided by the MemorySSA, ScalarEvolution and AAResults interfaces to backward walk the definition chains concurring to the creation of the value fetched by each load instruction in the block. Doing that, it is filling a structure which keeps track of the aliasing store instructions, the stored values, and the offsets and sizes overlapping with the memory slot fetched by each load. If a sequence of store assignments completely defining the value of the whole memory slot is found, the chain is processed to remove the store-to-load indirection. Subsequent passes may then rely on this new indirection-free chain to apply more transformations. As an example the previous LLVM-IR snippet turns in the following optimized LLVM-IR snippet when the MemoryCoalescing pass is applied before executing the InstCombine pass. Nice huh?

define dso_local i64 @ThanksToLLVMMySonBswap64IsBack(i64* noalias nonnull align 8 dereferenceable(8) %rax, i64* noalias nonnull align 8 dereferenceable(8) %rbx, i64* noalias nonnull align 8 dereferenceable(8) %rcx, i64* noalias nonnull align 8 dereferenceable(8) %rdx, i64* noalias nonnull align 8 dereferenceable(8) %rsi, i64* noalias nonnull align 8 dereferenceable(8) %rdi, i64* noalias nonnull align 8 dereferenceable(8) %rbp, i64* noalias nonnull align 8 dereferenceable(8) %rsp, i64* noalias nonnull align 8 dereferenceable(8) %r8, i64* noalias nonnull align 8 dereferenceable(8) %r9, i64* noalias nonnull align 8 dereferenceable(8) %r10, i64* noalias nonnull align 8 dereferenceable(8) %r11, i64* noalias nonnull align 8 dereferenceable(8) %r12, i64* noalias nonnull align 8 dereferenceable(8) %r13, i64* noalias nonnull align 8 dereferenceable(8) %r14, i64* noalias nonnull align 8 dereferenceable(8) %r15, i64* noalias nonnull align 8 dereferenceable(8) %flags, i64 %KEY_STUB, i64 %RET_ADDR, i64 %REL_ADDR) {
  %1 = load i64, i64* %rax, align 8
  %2 = call i64 @llvm.bswap.i64(i64 %1)
  store i64 %2, i64* %rax, align 8
  ret i64 5368713262
}

PartialOverlapDSE

This pass also falls under the category of the generic LLVM optimization passes that couldn’t possibly be included in the mainline framework because they wouldn’t match the quality criteria of a stable pass. Although the transformations done by this pass are applicable to generic LLVM-IR code, even if the handled cases are most likely to be found in obfuscated code.

Conceptually similar to the MemoryCoalescing pass, the goal of this pass is to sweep a function to identify chains of store instructions that post-dominate a single store instruction and kill its value before it is actually being fetched. Passes like DSE are doing a similar job, although limited to some forms of full overlapping caused by multiple stores on a single post-dominated store.

Applying the -O3 pipeline to the following example won’t remove the first 64 bits dead store at RAM[%0], even if the subsequent 64 bits stores at RAM[%0 - 4] and RAM[%0 + 4] fully overlap it, redefining its value.

define dso_local void @DSE(i64 %0) local_unnamed_addr #0 {
  %2 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %0
  %3 = bitcast i8* %2 to i64*
  store i64 1234605616436508552, i64* %3, align 1
  %4 = add i64 %0, -4
  %5 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %4
  %6 = bitcast i8* %5 to i64*
  store i64 -6148858396813837381, i64* %6, align 1
  %7 = add i64 %0, 4
  %8 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %7
  %9 = bitcast i8* %8 to i64*
  store i64 -3689348814455574802, i64* %9, align 1
  ret void
}

Adding the PartialOverlapDSE pass to the pipeline will identify and kill the first store, enabling other passes to eventually kill the chain of computations contributing to the stored value. The built-in DSE pass is most likely not executing such a kill because collecting information about multiple overlapping stores is an expensive operation.

PointersHoisting

This pass is strictly related to the IsGuaranteedLoopInvariant patch I submitted, in fact it is just identifying all the pointers that could be safely hoisted to the entry block because depending solely on values coming directly from the entry block. Applying this kind of transformation prior to the execution of the DSE pass may lead to better optimization results.

As an example, consider this devirtualized function containing a rather useless switch case. I’m saying rather useless because each store in the case blocks is post-dominated and killed by the store i32 22, i32* %85 instruction, but LLVM is not going to kill those stores until we move the pointer computation to the entry block.

define dso_local i64 @F_0x1400045b0(i64* noalias nonnull align 8 dereferenceable(8) %rax, i64* noalias nonnull align 8 dereferenceable(8) %rbx, i64* noalias nonnull align 8 dereferenceable(8) %rcx, i64* noalias nonnull align 8 dereferenceable(8) %rdx, i64* noalias nonnull align 8 dereferenceable(8) %rsi, i64* noalias nonnull align 8 dereferenceable(8) %rdi, i64* noalias nonnull align 8 dereferenceable(8) %rbp, i64* noalias nonnull align 8 dereferenceable(8) %rsp, i64* noalias nonnull align 8 dereferenceable(8) %r8, i64* noalias nonnull align 8 dereferenceable(8) %r9, i64* noalias nonnull align 8 dereferenceable(8) %r10, i64* noalias nonnull align 8 dereferenceable(8) %r11, i64* noalias nonnull align 8 dereferenceable(8) %r12, i64* noalias nonnull align 8 dereferenceable(8) %r13, i64* noalias nonnull align 8 dereferenceable(8) %r14, i64* noalias nonnull align 8 dereferenceable(8) %r15, i64* noalias nonnull align 8 dereferenceable(8) %flags, i64 %KEY_STUB, i64 %RET_ADDR, i64 %REL_ADDR) {
  %1 = load i64, i64* %rsp, align 8
  %2 = load i64, i64* %rcx, align 8
  %3 = call { i32, i32, i32, i32 } asm "  xchgq  %rbx,${1:q}\0A  cpuid\0A  xchgq  %rbx,${1:q}", "={ax},=r,={cx},={dx},0,~{dirflag},~{fpsr},~{flags}"(i32 1)
  %4 = extractvalue { i32, i32, i32, i32 } %3, 0
  %5 = extractvalue { i32, i32, i32, i32 } %3, 1
  %6 = and i32 %4, 4080
  %7 = icmp eq i32 %6, 4064
  %8 = xor i32 %4, 32
  %9 = select i1 %7, i32 %8, i32 %4
  %10 = and i32 %5, 16777215
  %11 = add i32 %9, %10
  %12 = load i64, i64* bitcast (i8* getelementptr inbounds ([0 x i8], [0 x i8]* @GS, i64 0, i64 96) to i64*), align 1
  %13 = add i64 %12, 288
  %14 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %13
  %15 = bitcast i8* %14 to i16*
  %16 = load i16, i16* %15, align 1
  %17 = zext i16 %16 to i32
  %18 = load i64, i64* bitcast (i8* getelementptr inbounds ([0 x i8], [0 x i8]* @RAM, i64 0, i64 5369231568) to i64*), align 1
  %19 = shl nuw nsw i32 %17, 7
  %20 = add i64 %18, 32
  %21 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %20
  %22 = bitcast i8* %21 to i32*
  %23 = load i32, i32* %22, align 1
  %24 = xor i32 %23, 2480
  %25 = add i32 %11, %19
  %26 = trunc i64 %18 to i32
  %27 = add i64 %18, 88
  %28 = xor i32 %25, %26
  br label %29

29:                                               ; preds = %37, %0
  %30 = phi i64 [ %27, %0 ], [ %38, %37 ]
  %31 = phi i32 [ %24, %0 ], [ %39, %37 ]
  %32 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %30
  %33 = bitcast i8* %32 to i32*
  %34 = load i32, i32* %33, align 1
  %35 = xor i32 %34, 30826
  %36 = icmp eq i32 %28, %35
  br i1 %36, label %41, label %37

37:                                               ; preds = %29
  %38 = add i64 %30, 8
  %39 = add i32 %31, -1
  %40 = icmp eq i32 %31, 1
  br i1 %40, label %86, label %29

41:                                               ; preds = %29
  %42 = add i64 %1, 40
  %43 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %42
  %44 = bitcast i8* %43 to i32*
  %45 = load i32, i32* %44, align 1
  %46 = add i64 %1, 36
  %47 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %46
  %48 = bitcast i8* %47 to i32*
  store i32 %45, i32* %48, align 1
  %49 = icmp ugt i32 %45, 5
  %50 = zext i32 %45 to i64
  %51 = add i64 %1, 32
  br i1 %49, label %81, label %52

52:                                               ; preds = %41
  %53 = shl nuw nsw i64 %50, 1
  %54 = and i64 %53, 4294967296
  %55 = sub nsw i64 %50, %54
  %56 = shl nsw i64 %55, 2
  %57 = add nsw i64 %56, 5368964976
  %58 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %57
  %59 = bitcast i8* %58 to i32*
  %60 = load i32, i32* %59, align 1
  %61 = zext i32 %60 to i64
  %62 = add nuw nsw i64 %61, 5368709120
  switch i32 %60, label %66 [
    i32 1465288, label %63
    i32 1510355, label %78
    i32 1706770, label %75
    i32 2442748, label %72
    i32 2740242, label %69
  ]

63:                                               ; preds = %52
  %64 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %65 = bitcast i8* %64 to i32*
  store i32 9, i32* %65, align 1
  br label %66

66:                                               ; preds = %52, %63
  %67 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %68 = bitcast i8* %67 to i32*
  store i32 20, i32* %68, align 1
  br label %69

69:                                               ; preds = %52, %66
  %70 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %71 = bitcast i8* %70 to i32*
  store i32 30, i32* %71, align 1
  br label %72

72:                                               ; preds = %52, %69
  %73 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %74 = bitcast i8* %73 to i32*
  store i32 55, i32* %74, align 1
  br label %75

75:                                               ; preds = %52, %72
  %76 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %77 = bitcast i8* %76 to i32*
  store i32 99, i32* %77, align 1
  br label %78

78:                                               ; preds = %52, %75
  %79 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %80 = bitcast i8* %79 to i32*
  store i32 100, i32* %80, align 1
  br label %81

81:                                               ; preds = %41, %78
  %82 = phi i64 [ %62, %78 ], [ %50, %41 ]
  %83 = phi i64 [ 5368709120, %78 ], [ %2, %41 ]
  %84 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %51
  %85 = bitcast i8* %84 to i32*
  store i32 22, i32* %85, align 1
  store i64 %83, i64* %rcx, align 8
  br label %86

86:                                               ; preds = %37, %81
  %87 = phi i64 [ %82, %81 ], [ 3735929054, %37 ]
  %88 = phi i64 [ 5368727067, %81 ], [ 0, %37 ]
  store i64 %87, i64* %rax, align 8
  ret i64 %88
}

When the PointersHoisting pass is applied before executing the DSE pass we obtain the following code, where the switch case has been completely removed because it has been deemed dead.

define dso_local i64 @F_0x1400045b0(i64* noalias nocapture nonnull align 8 dereferenceable(8) %0, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %1, i64* noalias nocapture nonnull align 8 dereferenceable(8) %2, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %3, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %4, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %5, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %6, i64* noalias nocapture nonnull readonly align 8 dereferenceable(8) %7, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %8, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %9, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %10, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %11, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %12, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %13, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %14, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %15, i64* noalias nocapture nonnull readnone align 8 dereferenceable(8) %16, i64 %17, i64 %18, i64 %19) local_unnamed_addr {
  %21 = load i64, i64* %7, align 8
  %22 = load i64, i64* %2, align 8
  %23 = tail call { i32, i32, i32, i32 } asm "  xchgq  %rbx,${1:q}\0A  cpuid\0A  xchgq  %rbx,${1:q}", "={ax},=r,={cx},={dx},0,~{dirflag},~{fpsr},~{flags}"(i32 1)
  %24 = extractvalue { i32, i32, i32, i32 } %23, 0
  %25 = extractvalue { i32, i32, i32, i32 } %23, 1
  %26 = and i32 %24, 4080
  %27 = icmp eq i32 %26, 4064
  %28 = xor i32 %24, 32
  %29 = select i1 %27, i32 %28, i32 %24
  %30 = and i32 %25, 16777215
  %31 = add i32 %29, %30
  %32 = load i64, i64* bitcast (i8* getelementptr inbounds ([0 x i8], [0 x i8]* @GS, i64 0, i64 96) to i64*), align 1
  %33 = add i64 %32, 288
  %34 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %33
  %35 = bitcast i8* %34 to i16*
  %36 = load i16, i16* %35, align 1
  %37 = zext i16 %36 to i32
  %38 = load i64, i64* bitcast (i8* getelementptr inbounds ([0 x i8], [0 x i8]* @RAM, i64 0, i64 5369231568) to i64*), align 1
  %39 = shl nuw nsw i32 %37, 7
  %40 = add i64 %38, 32
  %41 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %40
  %42 = bitcast i8* %41 to i32*
  %43 = load i32, i32* %42, align 1
  %44 = xor i32 %43, 2480
  %45 = add i32 %31, %39
  %46 = trunc i64 %38 to i32
  %47 = add i64 %38, 88
  %48 = xor i32 %45, %46
  %49 = add i64 %21, 32
  %50 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %49
  br label %51

  %52 = phi i64 [ %47, %20 ], [ %60, %59 ]
  %53 = phi i32 [ %44, %20 ], [ %61, %59 ]
  %54 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %52
  %55 = bitcast i8* %54 to i32*
  %56 = load i32, i32* %55, align 1
  %57 = xor i32 %56, 30826
  %58 = icmp eq i32 %48, %57
  br i1 %58, label %63, label %59

  %60 = add i64 %52, 8
  %61 = add i32 %53, -1
  %62 = icmp eq i32 %53, 1
  br i1 %62, label %88, label %51

  %64 = add i64 %21, 40
  %65 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %64
  %66 = bitcast i8* %65 to i32*
  %67 = load i32, i32* %66, align 1
  %68 = add i64 %21, 36
  %69 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %68
  %70 = bitcast i8* %69 to i32*
  store i32 %67, i32* %70, align 1
  %71 = icmp ugt i32 %67, 5
  %72 = zext i32 %67 to i64
  br i1 %71, label %84, label %73

  %74 = shl nuw nsw i64 %72, 1
  %75 = and i64 %74, 4294967296
  %76 = sub nsw i64 %72, %75
  %77 = shl nsw i64 %76, 2
  %78 = add nsw i64 %77, 5368964976
  %79 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %78
  %80 = bitcast i8* %79 to i32*
  %81 = load i32, i32* %80, align 1
  %82 = zext i32 %81 to i64
  %83 = add nuw nsw i64 %82, 5368709120
  br label %84

  %85 = phi i64 [ %83, %73 ], [ %72, %63 ]
  %86 = phi i64 [ 5368709120, %73 ], [ %22, %63 ]
  %87 = bitcast i8* %50 to i32*
  store i32 22, i32* %87, align 1
  store i64 %86, i64* %2, align 8
  br label %88

  %89 = phi i64 [ %85, %84 ], [ 3735929054, %59 ]
  %90 = phi i64 [ 5368727067, %84 ], [ 0, %59 ]
  store i64 %89, i64* %0, align 8
  ret i64 %90
}

ConstantConcretization

This pass falls under the category of the generic LLVM optimization passes that are useful when dealing with obfuscated code, but basically useless, at least in the current shape, in a standard compilation pipeline. In fact, it’s not uncommon to find obfuscated code relying on constants stored in data sections added during the protection phase.

As an example, on some versions of VMProtect, when the Ultra mode is used, the conditional branch computations involve dummy constants fetched from a data section. Or if we think about a virtualized jump table (e.g. generated by a switch in the original binary), we also have to deal with a set of constants fetched from a data section.

Hence the reason for having a custom pass that, during the execution of the pipeline, identifies potential constant data accesses and converts the associated memory load into an LLVM constant (or chain of constants). This process can be referred to as constant(s) concretization.

The pass is going to identify all the load memory accesses in the function and determine if they fall in the following categories:

  • A constantexpr memory load that is using an address contained in one of the binary sections; this case is what you would hit when dealing with some kind of data-based obfuscation;
  • A symbolic memory load that is using as base an address contained in one of the binary sections and as index an expression that is constrained to a limited amount of values; this case is what you would hit when dealing with a jump table.

In both cases the user needs to provide a safe set of memory ranges that the pass can consider as read-only, otherwise the pass will restrict the concretization to addresses falling in read-only sections in the binary.

In the first case, the address is directly available and the associated value can be resolved simply parsing the binary.

In the second case the expression computing the symbolic memory access is sliced, the constraint(s) coming from the predecessor block(s) are harvested and Souper is queried in an incremental way (conceptually similar to the one used while solving the outgoing edges in a VmBlock) to obtain the set of addresses accessing the binary. Each address is then verified to be really laying in a binary section and the corresponding value is fetched. At this point we have a unique mapping between each address and its value, that we can turn into a selection cascade, illustrated in the following LLVM-IR snippet:

; Fetching the switch control value from [rsp + 40]
%2 = add i64 %rsp, 40
%3 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %2
%4 = bitcast i8* %3 to i32*
%72 = load i32, i32* %4, align 1
; Computing the symbolic address
%84 = zext i32 %72 to i64
%85 = shl nuw nsw i64 %84, 1
%86 = and i64 %85, 4294967296
%87 = sub nsw i64 %84, %86
%88 = shl nsw i64 %87, 2
%89 = add nsw i64 %88, 5368964976
; Generated selection cascade
%90 = icmp eq i64 %89, 5368964988
%91 = icmp eq i64 %89, 5368964980
%92 = icmp eq i64 %89, 5368964984
%93 = icmp eq i64 %89, 5368964992
%94 = icmp eq i64 %89, 5368964996
%95 = select i1 %90, i64 2442748, i64 1465288
%96 = select i1 %91, i64 650651, i64 %95
%97 = select i1 %92, i64 2740242, i64 %96
%98 = select i1 %93, i64 1706770, i64 %97
%99 = select i1 %94, i64 1510355, i64 %98

The %99 value will hold the proper constant based on the address computed by the %89 value. The example above represents the lifted jump table shown in the next snippet, where you can notice the jump table base 0x14003E770 (5368964976) and the corresponding addresses and values:

.rdata:0x14003E770 dd 0x165BC8
.rdata:0x14003E774 dd 0x9ED9B
.rdata:0x14003E778 dd 0x29D012
.rdata:0x14003E77C dd 0x2545FC
.rdata:0x14003E780 dd 0x1A0B12
.rdata:0x14003E784 dd 0x170BD3

If we have a peek at the sliced jump condition implementing the virtualized switch case (below), this is how it looks after the ConstantConcretization pass has been scheduled in the pipeline and further InstCombine executions updated the selection cascade to compute the switch case addresses. Souper will therefore be able to identify the 6 possible outgoing edges, leading to the devirtualized switch case presented in the PointersHoisting section:

; Fetching the switch control value from [rsp + 40]
%2 = add i64 %rsp, 40
%3 = getelementptr inbounds [0 x i8], [0 x i8]* @RAM, i64 0, i64 %2
%4 = bitcast i8* %3 to i32*
%72 = load i32, i32* %4, align 1
; Computing the symbolic address
%84 = zext i32 %72 to i64
%85 = shl nuw nsw i64 %84, 1
%86 = and i64 %85, 4294967296
%87 = sub nsw i64 %84, %86
%88 = shl nsw i64 %87, 2
%89 = add nsw i64 %88, 5368964976
; Generated selection cascade
%90 = icmp eq i64 %89, 5368964988
%91 = icmp eq i64 %89, 5368964980
%92 = icmp eq i64 %89, 5368964984
%93 = icmp eq i64 %89, 5368964992
%94 = icmp eq i64 %89, 5368964996
%95 = select i1 %90, i64 5371151872, i64 5370415894
%96 = select i1 %91, i64 5369359775, i64 %95
%97 = select i1 %92, i64 5371449366, i64 %96
%98 = select i1 %93, i64 5370174412, i64 %97
%99 = select i1 %94, i64 5370219479, i64 %98
%100 = call i64 @HelperKeepPC(i64 %99) #15

It is well known that all the virtualization-based protectors support only a subset of the targeted ISA. Thus, when an unsupported instruction is found, an exit from the virtual machine is executed (context switching to the host code), running the unsupported instruction(s) and re-entering the virtual machine (context switching back to the virtualized code).

The UnsupportedInstructionsLiftingToLLVM proof-of-concept is an attempt to lift the unsupported instructions to LLVM-IR, generating an InlineAsm instruction configured with the set of clobbering constraints and (ex|im)plicitly accessed registers. An execution context structure representing the general purpose registers is employed during the lifting to feed the inline assembly call instruction with the loaded registers, and to store the updated registers after the inline assembly execution.

This approach guarantees a smooth connection between two virtualized VmStubs and an intermediate sequence of unsupported instructions, enabling some of the LLVM optimizations and a better registers allocation during the recompilation phase.

An example of the lifted unsupported instruction rdtsc follows:

define void @Unsupported_rdtsc(%ContextTy* nocapture %0) local_unnamed_addr #0 {
  %2 = tail call %IAOutTy.0 asm sideeffect inteldialect "rdtsc", "={eax},={edx}"() #1
  %3 = bitcast %ContextTy* %0 to i32*
  %4 = extractvalue %IAOutTy.0 %2, 0
  store i32 %4, i32* %3, align 4
  %5 = getelementptr inbounds %ContextTy, %ContextTy* %0, i64 0, i32 3, i32 0
  %6 = bitcast %RegisterW* %5 to i32*
  %7 = extractvalue %IAOutTy.0 %2, 1
  store i32 %7, i32* %6, align 4
  ret void
}

An example of the lifted unsupported instruction cpuid follows:

define void @Unsupported_cpuid(%ContextTy* nocapture %0) local_unnamed_addr #0 {
  %2 = bitcast %ContextTy* %0 to i32*
  %3 = load i32, i32* %2, align 4
  %4 = getelementptr inbounds %ContextTy, %ContextTy* %0, i64 0, i32 2, i32 0
  %5 = bitcast %RegisterW* %4 to i32*
  %6 = load i32, i32* %5, align 4
  %7 = tail call %IAOutTy asm sideeffect inteldialect "cpuid", "={eax},={ecx},={edx},={ebx},{eax},{ecx}"(i32 %3, i32 %6) #1
  %8 = extractvalue %IAOutTy %7, 0
  store i32 %8, i32* %2, align 4
  %9 = extractvalue %IAOutTy %7, 1
  store i32 %9, i32* %5, align 4
  %10 = getelementptr inbounds %ContextTy, %ContextTy* %0, i64 0, i32 3, i32 0
  %11 = bitcast %RegisterW* %10 to i32*
  %12 = extractvalue %IAOutTy %7, 2
  store i32 %12, i32* %11, align 4
  %13 = getelementptr inbounds %ContextTy, %ContextTy* %0, i64 0, i32 1, i32 0
  %14 = bitcast %RegisterW* %13 to i32*
  %15 = extractvalue %IAOutTy %7, 3
  store i32 %15, i32* %14, align 4
  ret void
}

I haven’t really explored the recompilation in depth so far, because my main objective was to obtain readable LLVM-IR code, but some considerations follow:

  • If the goal is being able to execute, and eventually decompile, the recovered code, then compiling the devirtualized function using the layer of indirection offered by the general purpose register pointers is a valid way to do so. It is conceptually similar to the kind of indirection used by Remill with its own State structure. SATURN employs this technique when the stack slots and arguments recovery cannot be applied.
  • If the goal is to achieve a 1:1 register allocation, then things get more complicated because one can’t simply map all the general purpose register pointers to the hardware registers hoping for no side-effect to manifest.

The major issue to deal with when attempting a 1:1 mapping is related to how the recompilation may unexpectedly change the stack layout. This could happen if, during the register allocation phase, some spilling slot is allocated on the stack. If these additional spilling+reloading semantics are not adequately handled, some pointers used by the function may access unforeseen stack slots with disastrous results.

The following log files contain the output of the PoC tool executed on functions showcasing different code constructs (e.g. loop, jump table) and accessing different data structures (e.g. GS segment, DS segment, KUSER_SHARED_DATA structure):

  • 0x140001d10@DevirtualizeMe1: calling KERNEL32.dll::GetTickCount64 and literally included as nostalgia kicked in;
  • 0x140001e60@DevirtualizeMe2: executing an unsupported cpuid and with some nicely recovered llvm.fshl.i64 intrinsic calls used as rotations;
  • 0x140001d20@DevirtualizeMe2: calling ADVAPI32.dll::GetUserNameW and with a nicely recovered llvm.bswap.i64 intrinsic call;
  • 0x13001334@EMP: DllEntryPoint, calling another internal function (intra-call);
  • 0x1301d000@EMP: calling KERNEL32.dll::LoadLibraryA, KERNEL32.dll::GetProcAddress, calling other internal functions (intra-calls), executing several unsupported cpuid instructions;
  • 0x130209c0@EMP: accessing KUSER_SHARED_DATA and with nicely synthesized conditional jumps;
  • 0x1400044c0@Switches64: executing the CPUID handler and devirtualized with PointersHoisting disabled to preserve the switch case.

Searching for the @F_ pattern in your favourite text editor will bring you directly to each devirtualized VmStub, immediately preceded by the textual representation of the recovered CFG.

I apologize for the length of the series, but I didn’t want to discard bits of information that could possibly help others approaching LLVM as a deobfuscation framework, especially knowing that, at this time, several parties are currently working on their own LLVM-based solution. I felt like showcasing its effectiveness and limitations on a well-known obfuscator was a valid way to dive through most of the details. Please note that the process described in the posts is just one of the many possible ways to approach the problem, and by no means the best way.

The source code of the proof-of-concept should be considered an experimentation playground, with everything that involves (e.g. bugs, unhandled edge cases, non production-ready quality). As a matter of fact, some of the components are barely sketched to let me focus on improving the LLVM optimization pipeline. In the future I’ll try to find the time to polish most of it, but in the meantime I hope it can at least serve as a reference to better understand the explained concepts.

Feel free to reach out with doubts, questions or even flaws you may have found in the process, I’ll be more than happy to allocate some time to discuss them.

I’d like to thank:

  • Peter, for introducing me to LLVM and working on SATURN together.
  • mrexodia and mrphrazer, for the in-depth review of the posts.
  • justmusjle, for enhancing the colors used by the diagrams.
  • Secret Club, for their suggestions and series hosting.

See you at the next LLVM adventure!


文章来源: https://secret.club/2021/09/08/vmprotect-llvm-lifting-3.html
如有侵权请联系:admin#unsafe.sh