Recently, we've learned about NyxScope, a multi-protocol SDR receiver program for Windows that comes with multiple native decoders built right into the software. Their own description describes this all-in-one program best:

You get spectrum and waterfall, multiple concurrent VFOs, trunked-radio following, digital voice, aviation and marine tracking, paging, ISM sensors, HD Radio, and transcription, in one binary.

NyxScope includes decoders for P25 Phase 1 and Phase 2 voice, EDACS and NXDN control channels, ADS-B, AIS, ACARS, POCSAG, FLEX, LoRa CSS PHY + LoRaWAN MAC, Morse, RDS, CTCSS/DCS, Iridium decoding (with voice), and also includes a signal classification tool, Bluetooth LE scanner, and Whisper voice-to-text transcriber. It also outsources decoding of other protocols to mature decoding software such as multimon-ng, rtl_433, dsd-neo, nrsc5, direwolf, dumpvdl2, dump978, rs41mod where required, noting that the outsourced decoders are bundled with the software, meaning no extra installation work is required.

The software supports RTL-SDR, HackRF, Airpsy, bladeRF, SDRplay, Fobos and PlutoSDR. It also supports using multiple SDRs used in parallel.

The software does not appear to be open source, but it is provided for free with a limitation of 3 concurrent VFOs and a limitation on recording, transcribing, and pager messages. A perpetual per-machine license for $89.95 can be purchased to lift these restrictions and add access to their FCC frequency lookup database.